HuiLong Electronic Materials Co.,Ltd.
DaJiShan 519-7,Wuxi, Jiangsu, China
2. COMPOSITION AND
INFORMATION ON INGREDIENTS
Name Conc. % CAS #
Methy1-tetrahydrophalic anhydride >99
inhale plenty of high dencity product leads to nausea, soar
throat, cough, stuffy chest and difficult breath. No sequelae.
This product can also cause skin congestion and dropsy.
damage the environment.
explosion hazard: no explosion and burning reaction with kinds
4. FIRST AID
remove the victim from the contamination immediately to fresh
Skin contact: take
off the cloth and flush the skin with soap at least 15 mins, see
Eye contact: lift
eyelid and flush with plenty of water or physiological saline
immediately at least 15 mins. See the doctor.
enough warm water to induce vomit. See the doctor.
AND EXPLOSION DATA
Fighting Media and instructions: dry chemical powder, carbon
dioxide or dry sand, water and foam.
cut the power. Move the container from fire to spacious place.
Do not stop spray water until finishing extinguishing to keep
the container cool.
hazards in presence of various substances: none
sources. Evacuate from contaminated area to safe place. Take
isolation, restrict coming in and going out. People who make
treatment should wear respirator and fire protective clothes.
Try to cut leaking sources avoid flow to sewer.
Small leakage: try
to scoop leaked material into airtight container and absorb with
active carbon or other inert material, or flush with plenty of
water and drain the diluted material to waste water system.
Large leakage: dike
or dig, use receiver to collect leaked material and move to
waste treatment station.
7. HANDLING AND
doors with ventilation, operator should receive special training
and operate strictly abide by rules. Far away from ignition
sources. No smoking. Use ventilation equipment. Handle with
care. To avoid damaging fire-fighting equipment and emergency
store in cool warehouse with ventilation. Far away from ignition
sunlight and rain. Keep container closed. Store seprately from
oxidant, alkali and
eatable chemical materials.
CONTROLS - PERSONAL PROTECTION
Controls: ventilate during production
wear filter respirator and mask.
Eye protection: no
particular protection, wear safety goggles when density is high
no particular protection, wear safety clothes when density is
wear oil-risistant rubber gloves.
no smoking, diet and drinking at workplace. Take shower and
change cloth after working.
9. PHYSICAL AND
state and appearance liquid
Colour yellowish transparent liquid
Odour characteristic odor
soluble in water, alcohol, aether, acet
10. STABILITY AND
and become acid after contacting water
Forbid to use with:
water and alkali
Condition to avoid:
flame, water and alkali
products: CO and CO2
Special remarks on
chronic effects on humans: may cause skin disease .
Special remarks on
acute effects on humans: LD50: 5050mg/kg
Ecotoxicity: No relevant information found.
and COD: No relevant information found.
Products of biodegradation: No relevant information found.
Toxicity of the Products: No relevant information found.
Do not dump
into sewers, on the ground or into any body of water.
expert on the disposal. Ensure disposal in compliance with
ensure conformity to local disposal regulations.
regulations in your country. Not belong to dangerous goods.
store according to general caution and instructions in before
Packed with iron cans otr plastic cans. Keep the material away
material safety management rules( made on Feb 17, 1987) has set
rules and regulations on safe production, usages, load and
To the best
of our knowledge, the information contained here in is accurate.
materials may present unknown hazards and should be used in
certain hazards are described herein, we cannot guarantee that
these are the only
hazards, which exist. Final determination of suitability of any
material is the
sole responsibility of the user.